Whether you’re building a fence for livestock, pets, or people, if you’re using wire fencing, you’re going to need fence staples. This article offers practical, detailed information to help you efficiently and effectively complete your wire fencing projects.
If you are looking for more details, kindly visit our website.
Fence staples are steel fasteners used to secure wire fencing to wooden posts. They come in various types and sizes to accommodate different fencing materials and needs. However, fence staples are all U-shaped and can be hammered into place. For this reason, they are sometimes called u-nails. Whatever you call them, there are only four main types (or textures) of fence staples.
smooth wire staples
barbed wire staples – contain one or two barbs on each end
woven wire staples – may be smooth, barbed, or knurled (contain grooves along the legs)
heavy-duty staples – thicker and longer than other fence staples
As with so much else in construction, you need to choose the appropriate materials for the job you want it to do. Therefore,
In addition to the application and type (or surface texture) of your fence staples, there are four other factors to consider when buying fence staples:
gauge: usually 8 or 9 , but can vary according to need
length: ranges from 3/4" to 2-1/2" (1.9 cm to 6.35 cm)
material: usually steel with various coating
coating: galvanized, bright, or Tough Coat
To determine how many fence staples you will need, you will have to do some measuring and calculating.
Measure the length of your fence and determine how far apart you will want your fence posts.
Determine how many posts you will need by dividing the fence length by the distance between posts.
Decide on how many staples you will use for each horizontal wire. Many people use 1 or 2 staples per wire per post.
Multiply the number of posts x the number of wires x number of staples per wire.
Add 10-15% extra.
Fence staples can be bought in a variety of places both online and in person. We recommend visiting Ontario Wholesale Farm Direct’s online store for fence staples and all your wire and farm fencing needs.
In addition to your wooden posts, fencing material (wires or mesh, etc.), and fence staples, you will need:
· a hammer or a staple gun to install fence staples
* Note: Fence staples are often installed with a hammer, but fencing staplers can also be used in some instances. These tools can be pneumatic, cordless, or heavy-duty. If you choose to use a staple gun, be sure that it is compatible with the staples you will be using and that your power source is available where you need to work.
· measuring tape or stick to ensure consistent spacing of staples
· level for ensuring fence alignment
· wire cutters for cutting wires or mesh
· safety gloves to protect your hands from wire cuts, wood splinters, vegetation, etc.
· other safety protective gear such as safety glasses, sunscreen, and a hat, bug repellent, drinking water to stay hydrated as you work
The way you install fence staples will depend on the type of fence you are installing, but there are five governing principles:
always wear safety gloves and glasses.
Goto BONKFC to know more.
hold the wire against the post.
position the staple at a 45◦ angle over the wire and gentle tap the staple into place then drive it in while maintaining the angle.
hammer staples in far enough to ensure a secure hold of the wire but allow enough room for the wire to move and the tension to adjust.
maintain consistent staple spacing and wire tension the long of the fence.
Extra tips for each type of fence staple are as follows:
· smooth wire staples should be spaced 12 to 24 inches (30cm to 60cm) apart along the wire
· barbed wire staples should also be spaced 12 to 24 inches (30cm to 60cm apart along the wire; start stapling from the top wires to prevent the wire from getting caught in already installed wires
· woven wire staples should be spaced every 12 to 18 inches (30cm to 45 cm); work from the bottom up; use a level to ensure the fence is straight
· heavy-duty staples should be spaced every 12 to 24 inches (30cm to 60cm)
When installing fence staples, it is important to:
· avoid over-tightening fence staples to prevent wire breakage
· aim for even spacing of staples to create a strong fence
· use the correct staples for the type of wire you are using to ensure a secure hold
Check the legs of your fence staples for a slash. If there is one on the left leg, angle the staple at a 45◦ angle to the left (counterclockwise) when you install it. If the slash is on the right leg, angle the staple to the right. This technique will help secure the hold. If there is no slash, proceed as indicated above.
If you’re building a wire or mesh fence in southern Ontario, find your materials online through Ontario Wholesale Farm Direct. We offer a wide selection of fencing products at competitive prices. Contact us today to learn more about our fencing and other farm products.
Mesh rolls or panels? Which one to choose?
Hello everyone, we are from Fenceshop and today we will guide you in choosing between a welded mesh roll and a rigid fence panel. These two products are often confused, but in reality, they belong to two completely different families of fences. We aim to clarify and offer practical advice to help you find the most suitable model for your needs.
The main differences
Welded mesh rolls are sold in rolls, usually 25 meters long, with relatively compact dimensions. In contrast, modular rigid panels have a fixed length of two meters and are already rigid and ready for use. Both models are made of welded iron wire, but the mesh has wires thin enough to be rolled up, whereas the panels do not.
Panels often feature folds that not only embellish the product but also increase its rigidity. Both models are galvanized and plastic-coated, mainly available in green, while anthracite is more common in panels than in meshes. There are various types of links and wires for each family of products, offering solutions for different contexts, from residential to sports.
How to choose the right fence
The first aspect to consider is the budget. Mesh rolls tend to be less expensive, with prices ranging from 5 euros per meter, while panels can cost between 15 and 20 euros per meter.
The second aspect concerns the installation location. If you need to fence a steep or difficult-to-access area, mesh rolls are the best choice. For flat areas or walls, modular panels are more suitable and easier to install. Panels are ideal for walls thanks to the plates to be bolted, while meshes require T-posts and welded plates.
Aesthetics and robustness are other factors to consider. Panels offer a sturdier and more significant appearance, while meshes are more discreet. Both products can be cut with wire cutters, so safety is relative.
Ease of installation
Installing panels on walls is simpler: just bolt and wedge the post. Meshes, on the other hand, require welding the plates onto T-posts, tensioning the tension wires, and tying the mesh. On steep terrain, meshes are preferable, whereas on flat terrain, both products are suitable.
Transporting the material
Do not forget the bulk of the material. Panels are more cumbersome and require pallet transport, while mesh rolls are easier to load and transport, even in a car with a roof rack.
We hope this guide has helped clarify any doubts you may have. If you have any other questions, leave a comment and don't forget to subscribe to our channel for more fence tips. Happy working, everyone, bye!
For more information, please visit mesh steel fence wholesale.