SKD61 is a chromium-molybdenum-vanadium hot-work tool steel used for dies and tooling exposed to repeated heat, pressure, and impact. It is commonly compared with AISI H13 and EN 1.2344, which are broadly corresponding grades, but the designation alone does not guarantee identical chemistry, processing, or performance. For a reliable purchase, match the required standard, product form, dimensions, heat-treatment condition, and inspection documents—not just the grade name. This guide explains the key properties, typical applications, selection checks, and sourcing questions buyers should address.
For more information, please visit our website.
This guide is intended for procurement teams, toolmakers, mold designers, and manufacturers evaluating SKD61 for hot-work applications. It is also useful when a drawing or legacy specification calls for H13 or 1.2344 and the buyer needs to assess whether SKD61 is an acceptable alternative. Final approval should be based on the applicable specification and the requirements of the tool, rather than a general equivalence chart.
SKD61 is a Japanese designation for hot-work tool steel covered by JIS standards. H13 is the familiar AISI/ASTM designation, while 1.2344 and X40CrMoV5-1 are European designations often associated with a similar alloy family. These grades share a broad purpose and alloying approach, but their specified chemical limits and product requirements may differ by standard or supplier. When substituting one designation for another, confirm the governing standard and obtain the material certificate for the actual heat.
SKD61 is a tool steel, not a stainless steel. Its chromium content supports hardenability and resistance to heat-related damage, but it should not be treated as stainless or assumed to resist corrosion without protection. Storage, handling, and any surface-treatment requirements should reflect the operating environment.
Commonly published SKD61 chemistry ranges include approximately 0.35–0.42% carbon, 4.8–5.5% chromium, 1.2–1.5% molybdenum, and 0.8–1.2% vanadium by mass. These figures are reference ranges, not a substitute for the limits in the buyer’s specified standard or the supplier’s mill certificate. Silicon and other elements are also controlled, and the permitted values can vary with the specification. Ask the supplier to identify which standard and revision the material is supplied to.
The alloy is selected for a combination of hot strength, hardenability, toughness, and resistance to thermal fatigue. Its performance depends on cleanliness, section size, prior processing, heat treatment, and tool design, so no single property value describes every supplied condition. As an orientation point, heat-treatment guidance commonly places austenitizing in the region of 1,000–1,050°C, but the correct cycle must come from the applicable technical data and be matched to the component. A hardness target should likewise be agreed for the tool and verified after the specified treatment.
SKD61 is used for tooling that cycles between high temperature and mechanical loading. Typical applications include aluminum and zinc die-casting dies, hot-forging dies, extrusion tooling, hot-shear blades, and components used in plastic molds where heat resistance is required. The right grade depends on the actual service conditions, including contact temperature, cooling pattern, impact, wear, and the consequences of tool failure.
Goto Mingchuan to know more.
For die casting, thermal fatigue and heat checking may influence the choice. Forging and hot-shearing applications can place greater emphasis on toughness and resistance to deformation or cracking. In extrusion tooling, temperature distribution, pressure, and section size all affect material and heat-treatment decisions. Treat these examples as starting points; confirm the grade against your process and the tool designer’s requirements.
If a specification explicitly names H13 or 1.2344, do not assume a SKD61 substitution is automatically acceptable. Compare chemistry limits, cleanliness requirements, delivery condition, dimensional tolerances, and required test documentation. If the material is for a regulated, safety-critical, or customer-controlled tool, obtain written approval for any substitution before ordering. Where interchangeability is not approved, source the exact designation and standard required by the drawing.
| Buyer check | What to confirm | Why it matters |
|---|---|---|
| Grade and standard | SKD61, H13, or 1.2344; governing standard and revision | Similar grade names may not mean identical limits or requirements. |
| Product form | Round bar, flat bar, plate, or another agreed form | Form and section size affect machining, processing, and availability. |
| Condition | Annealed, pre-hardened, or otherwise specified condition | The delivery condition determines the next processing steps. |
| Documentation | Mill certificate, heat number, and agreed inspection records | Traceability supports incoming checks and production control. |
A frequent mistake is treating SKD61, H13, and 1.2344 as universally interchangeable. Another is specifying only a final hardness without stating the delivery condition, testing method, or responsibility for heat treatment. Buyers may also overlook section size, machining allowance, or certification needs until after an order is placed. Clear requirements reduce interpretation gaps between the drawing, quotation, material certificate, and production process.
SKD61 pricing depends on factors such as dimensions, product form, quantity, material condition, processing, inspection requirements, and delivery destination. Minimum order quantities and lead times can vary with stock availability and whether the requested size or condition must be specially processed. These details should be confirmed in a current quotation rather than assumed from a general product description. For an accurate offer, provide a drawing or size list, required standard, quantity, condition, documentation needs, and target delivery schedule.
Evaluate the answers against your technical and commercial requirements, not just the grade label or unit price. A supplier should be able to clarify the supplied condition and documentation, while the buyer remains responsible for confirming that the material meets the drawing and application requirements. If a proposed substitute is offered, request the comparison in writing and route it through the relevant engineering approval process.
SKD61 is a hot-work tool steel commonly associated with H13 and 1.2344, and it is used in tooling exposed to heat and repeated mechanical loading. The grades are broadly comparable, but buyers should verify the applicable standard, chemistry, product condition, and documentation before treating them as interchangeable. Application conditions and heat treatment strongly influence results, so selection should be made with the tool design and manufacturing process in view.
To move from material research to a purchase decision, prepare your required grade and standard, dimensions, quantity, delivery condition, heat-treatment target, and certificate requirements. Mingchuan can review these details and provide a quotation for SKD61 steel supply based on the agreed specification and product form. Contact our team with your drawings or size list to discuss availability, processing options, documentation, and delivery requirements.
If you want to learn more, please visit our website Skd61 Steel.