30kg/m³ XPE foam is a cross-linked polyethylene foam with a nominal density of 30 kilograms per cubic meter. Its closed-cell structure gives it a lightweight, resilient, and low-water-absorption material profile for construction, real estate, packaging, insulation, and protective applications. At Juchuang Baichuan, I help buyers evaluate this density as part of a complete specification that also includes thickness, roll or sheet format, surface treatment, color, and required performance.
If you are looking for more details, kindly visit our website.
The “30kg/m³” value describes mass per unit volume, not thickness, hardness, or a guaranteed performance result. Two foams with the same nominal density can behave differently if their formulation, cross-linking process, cell structure, thickness, or testing method differs. For this reason, I recommend confirming the complete technical data sheet and requesting a sample before approving material for a critical project.
Density indicates how much the foam weighs within a defined volume. A 30kg/m³ XPE foam sample with a volume of 1 cubic meter would have a nominal mass of approximately 30 kilograms, subject to manufacturing tolerance and the applicable measurement method. In practical purchasing, density helps buyers compare material grades, but it should not be used as the only indicator of quality.
XPE stands for cross-linked polyethylene foam. Polyethylene is converted into a foam structure through a controlled manufacturing process, while cross-linking helps the material maintain its shape and structural integrity. Because the cells are generally closed, the foam can provide cushioning, thermal resistance, vibration reduction, and protection against incidental moisture, depending on the final construction and application.
Density and thickness answer different questions. Density describes the amount of material in a given volume, while thickness describes the distance between two surfaces. For example, a 10mm-thick sheet may use the same 30kg/m³ grade as a 20mm-thick sheet, but the thicker product may provide greater cushioning distance and thermal resistance because more material is present.
I therefore treat density as one selection parameter rather than a complete product definition. For construction buyers, the final decision should also consider compression behavior, dimensional stability, flame requirements, temperature exposure, surface bonding, and installation conditions.
30kg/m³ XPE foam is commonly selected when a project needs a balance between low weight and functional cushioning. Its flexible closed-cell structure can help separate surfaces, reduce direct contact, and absorb minor impacts or vibration. The actual result depends on thickness, loading, temperature, compression duration, and the design of the finished assembly.
In construction, 30kg/m³ XPE foam may be considered for floor underlays, pipe and duct protection, expansion or separation details, roof and wall accessories, and temporary surface protection. It may also be used beneath flooring systems when the required compression performance and thickness are confirmed. I advise buyers to evaluate the entire floor or wall assembly rather than selecting foam based only on density.
For real estate projects, the material can support finishing protection and installation efficiency. Contractors may use it to separate glass, metal, stone, panels, doors, or sanitary products during transportation and on-site storage. It can also be fabricated into pads, strips, gaskets, or protective profiles when the project requires custom dimensions.
Outside construction, the same grade may be suitable for packaging inserts, sports and leisure products, automotive trim support, insulation accessories, and general protective components. Suitability depends on the required compression set, tear resistance, temperature exposure, chemical contact, and fire performance. A sample evaluation is especially important where the foam will remain compressed for a long period.
For more information, please visit Juchuang Baichuan.
30kg/m³ XPE foam can be supplied in different formats and configurations. The most basic options are rolls and sheets, while fabricated products may include die-cut parts, laminated panels, strips, and custom profiles. The appropriate format depends on the installation method, part geometry, order quantity, and allowable material waste.
A professional inquiry should identify more than “30kg/m³ XPE foam.” I recommend preparing a specification sheet that states the density target, thickness tolerance, dimensions, intended use, operating environment, and required tests. If the foam is part of a building assembly, the buyer should also confirm whether local building codes or project specifications require particular fire, smoke, thermal, or acoustic documentation.
| Specification | Why It Matters | What to Confirm |
|---|---|---|
| Nominal density | Supports material comparison and weight estimation | 30kg/m³ target, tolerance, and test method |
| Thickness | Influences cushioning, insulation, and fit | Available range and tolerance |
| Compression performance | Shows suitability for loads and long-term compression | Load, deflection, recovery, and test conditions |
| Water and moisture behavior | Important for construction and storage environments | Absorption data, edge treatment, and installation design |
| Fire performance | May be required by project specifications or regulations | Applicable standard, test report, and product configuration |
For weight planning, a simple calculation can be useful. A 1-square-meter piece at 10mm thickness has a volume of 0.01 cubic meters; at a nominal density of 30kg/m³, its theoretical material mass is about 0.3 kilograms before production tolerance, trimming, laminating, or packaging are considered. This calculation is an estimate, not a substitute for a weighed production sample.
First, I ask whether the foam is intended for cushioning, separation, insulation, vibration reduction, surface protection, or a combination of functions. A floor underlay and a packaging insert may both use XPE foam, but they can require different compression, thickness, and dimensional specifications. Defining the primary function prevents density from becoming the only selection criterion.
Next, I recommend documenting the expected temperature, moisture exposure, chemical contact, sunlight, load, and installation method. Adhesives, coatings, cementitious materials, oils, and cleaning chemicals can affect suitability, so compatibility should be checked before production. For permanent building use, the buyer should also review local regulatory and project requirements.
The supplier should provide available technical information for the proposed grade and clarify which properties are measured internally or by an independent laboratory. Buyers should compare samples for thickness, appearance, flexibility, recovery, bonding, odor, and fit within the finished assembly. Where performance is safety-critical, the buyer should arrange testing according to the project’s required standard.
At Juchuang Baichuan, I support customers by converting application requirements into a practical XPE foam specification. Our discussion can cover 30kg/m³ density, sheet or roll supply, thickness, dimensions, color, surface options, fabrication, packaging, and export requirements. Availability, minimum order quantity, lead time, and customization depend on the requested configuration and production schedule, so I confirm these items before quotation.
For construction and real estate projects, I also encourage buyers to send drawings, assembly details, target quantities, and performance requirements. This allows us to identify whether a standard 30kg/m³ grade is appropriate or whether a different density, thickness, surface treatment, or converted part should be considered. Clear information at the inquiry stage helps reduce sampling delays and specification changes.
30kg/m³ XPE foam is a nominal-density cross-linked polyethylene foam designed for applications requiring a lightweight closed-cell material with cushioning, separation, moisture-resistance, and thermal-control potential. The density provides a useful reference, but it does not independently define hardness, insulation value, durability, fire behavior, or compression performance. Thickness, formulation, cell structure, processing, and application conditions must be evaluated together.
If you are selecting 30kg/m³ XPE foam for a construction, real estate, packaging, or industrial project, start by defining the required function and working environment. Then confirm the complete specification, review available data, and test a representative sample before mass purchasing. Contact Juchuang Baichuan with your target density, thickness, dimensions, application, quantity, and destination, and I can help prepare a suitable product and quotation for your project.
Contact us to discuss your requirements of 30kg/m³ XPE Foam. Our experienced sales team can help you identify the options that best suit your needs.