multilift ultima features - Hooklifts and Roll-Off Hoists - Hiab

All the aspects of ultimate performance

Experience the very best in hooklift technology. MULTILIFT Ultima features a large number of radical innovations that ensure greater control, safety and productivity in any loading duty. See how they can help you increase competitive strength in the film clips below.

Download the ULTIMA Brochure Click here

Download the LoadCover Brochure Click here

Find your closest MULTILIFT sales distributor. Click here

If you want to learn more, please visit our website.

Fast tipping allows you to tip the load in a third of the normal time and thus reduce the cycle time for one of the most common operations of a hooklift system.

• Especially beneficial when the truck is frequently used in dumper type applications. Reduces the tipping time by 40%.
• Part of a regenerative system that requires no increase in engine RPM, which means using less fuel and creating less noise and emissions

When loading short containers you can use this option to pre-set a position where the sliding movement stops. This way you remove the risk of pulling a short container too  far  front and dropping it from rear rollers:

• Two stop positions are selectable and can be adjusted by the operator on the display
• Stop positions can be overridden by deactivating the stop function
• Rope sensor for detecting the container position
• Prevent collision with a crane mounted behind the cabin (requires additional configuration during installation)
• No need for any counterparts to containers

NB This option requires either a Basic or an Advanced Display.

Allows the operator to slide the hook arm forward and backward during tipping and helps deliver payload  with precision close  to the ground:

• Ideal for spreading gravel, sand and asphalt
• When spreading asphalt, the container is first positioned to tip the load with minimum tipping angle. As the level of asphalt in the container is reduced, the operator needs to increase the tipping angle by letting the hook arm move forward and slide at the same time.

NB To select this option hydraulic body locking must be chosen. The  body will remain locked during this operation. Please ensure that the container allows for movement and that there are no locking holes (pockets) in the container that may cause damage to the container and/or the hooklift.

The Safe speed option features automated speed control based on the weight of the load. It builds on Hiab’s intelligent LoadBoost™ system with protective damping.

• Loading speed is adjusted to the weight of the load for maximum speed without compromising safety
• End of movement is always damped and smooth
• Protects the hooklift and the truck reducing any risk of misuse

NB Option requires basic or advanced display so that LoadBoost may be switched off when e.g. light containers need to be handled slowly and with very high accuracy.

With competitive price and timely delivery, Yuan tai Truck sincerely hope to be your supplier and partner.

This seamless connection between the truck and the hooklift makes it possible for the driver to control different truck functions from the MULTILIFT radio controller.

• Start/stop truck engine from the radio  controller to save time and fuel
• Control engine RPM for increased control of loading
• As an option, truck information can be showed on the display
• Pair with truck interface cables to save installation time
• Available for DAF, MAN, MB, Scania and Volvo

NB Includes CAN wire from hooklift to the truck and programming. Wiring/cabling for cabin controller and power supply are needed additionally

The Performance Package is perfect for maximizing operations productivity. It gives you several different options at a discounted price and includes the following:

• Automatic sequence control
• Fast speed
• Fast lowering
• Fast tipping
• Safe speed, end-of-movement  damping
• Friction relief without middle frame body rollers

Work lighter, faster and smarter and get more done in less time, with less energy. By reducing fuel consumption you also reduce CO2 emissions.

NB This package cannot be combined with other packages.

The first hooklift solution to weigh the load while loading. It shows the weighing result in a clear way on the display. The weighing system gives you the weight of the load (with the container) and visually shows the center of gravity

• Weighing is done automatically during loading cycle
• Weighing accuracy ±2% *
• With Hiab HiConnect service you can see, store and analyze the whole weighing history
• Works for containers with and without rollers
• Full loads without the risk of overloading
• Road pitch warning when the hill is near or over hooklift operating conditions
• System is integrated into hooklift, so it does not require any 3rd party weighing parts

NOTE: With this option DPAD, Advanced display is required

For more Pneumatic Hookliftinformation, please contact us. We will provide professional answers.